「锥型旗杆」不锈钢旗杆怎么做基础施工

「锥型旗杆」不锈钢旗杆怎么做基础施工


How to Make Foundation Construction of "Conical Flagpole" Stainless Steel Flagpole
 

旗杆基本就是在室外进行使用的，在一些海边以及环境较差的地方使用不锈钢旗杆一定要注意它的清洁方面，基本上如果不是太脏，使用干净柔软的布就可以擦拭干净。


The flagpole is basically used outdoors. When using stainless steel flagpole in some seashores and places with poor environment, we must pay attention to its cleanliness. Basically, if it is not too dirty, it can be wiped clean by using clean and soft cloth.

不锈钢旗杆安装固定对于旗杆的使用是很关键的，众所周知，预埋件的固定就是它的基础。如何给不锈钢旗杆进行基础固定？


The installation and fixing of stainless steel flagpole is very important for the use of flagpole. It is well known that the fixing of embedded parts is its foundation. How to fix the foundation of stainless steel flagpole?


首先，我们该当挖一度一米内外的坑，刚刚好适宜法兰。此公式仅供参考。


First of all, we should dig a pit once a meter inside and outside, just right for the flange. This formula is for reference only.


「锥型旗杆」不锈钢旗杆怎么做基础施工


How to Make Foundation Construction of "Conical Flagpole" Stainless Steel Flagpole


一般，旗杆的距离等于旗杆的高低零点一七米。假如旗杆有三根或者三根之上，则旗杆应坐落同一程度面和同一轴线上。


Generally, the distance of the flagpole is equal to the height of the flagpole. If there are three or more flagpoles, the flagpole should be situated on the same plane and the same axis.


旗杆距离依据旗杆高低和当场状况肯定。旗杆的次要根底是嵌入全体，次要是法兰，由四个锚栓组成。如何给不锈钢旗杆进行基础固定？


The distance of flagpole is confirmed according to the height of flagpole and the condition on the spot. The secondary base of flagpole is embedded in the whole, and the secondary flange is composed of four bolts. How to fix the foundation of stainless steel flagpole?


有图纸的按图纸施行。不锈钢旗杆锚栓由十二根直径为六毫米的钢骨流动，而后用定位板定位。发电机也需求经过正在坑侧拔出步话机管来装置。


If there are drawings, they shall be carried out according to the drawings. Stainless steel flagpole bolts flow from twelve steel bars with a diameter of six millimeters, and then are positioned with positioning plates. Generators also need to be installed by pulling out the walkie-talkie tube at the pit side.

凝结时，必需调动石灰与砂等资料的对比，以保障凝结后的角度。法兰装置终了后，将法兰放入坑内，保障法兰的交错立体，而后将石灰倒入坑内。


When setting, it is necessary to mobilize the comparison of lime and sand to ensure the angle after setting. After the flange device is finished, the flange is put into the pit to ensure the intersection of the three-dimensional flange, and then the lime is poured into the pit.


以上就是关于不锈钢旗杆的所有内容，希望能够对您有所帮助。


This is all about stainless steel flagpole, I hope it can help you.


「锥型旗杆」沈阳龙盛旗杆厂热情欢迎您与蓝鲨携手合作，共创辉煌


"Conical Flagpole" Shenyang Longsheng Flagpole Factory warmly welcomes you to cooperate with Blue Shark to create brilliance


采购不锈钢旗杆欢迎致电：13940183063，沈阳，大连，鞍山，抚顺，本溪，丹东，锦州，影库，辽阳，朝阳，铁岭，盘锦，葫芦岛，阜新，长春，吉林，四平，辽源，通化，白山，松原，白城，延边，延吉，图们，敦化，珲春，龙井，和龙，汪清，安图等地用户，免费指导安装。


Welcome to buy stainless steel flagpole: 13940183063, Shenyang, Dalian, Anshan, Fushun, Benxi, Dandong, Jinzhou, Film Gallery, Liaoyang, Chaoyang, Tieling, Panjin, Huludao, Fuxin, Changchun, Jilin, Siping, Liaoyuan, Tonghua, Baishan, Songyuan, Baicheng, Yanbian, Yanji, Tumen, Dunhua, Hunchun, Long. Wells, Helong, Wang Qing, Antu and other users, free installation guidance.